How to Press a DTF Transfer
Here's what you need to get started:
Place the DTF transfer on Garment
Explain your mission here.
Pressing
STEP 1
Heat Press the transfer With these settings:
- 300 degrees for 10-15 seconds.
- Medium pressure (6-7 pressure setting)
Peel It
STEP 2
Cold or Warm peel The PET FILM off transfer! ission here.
2nd Press
STEP 3
Cover the transfer with Teflon (for shiny look) or parchment paper (for matte look)
- 300 degrees for 7-10 seconds
- Medium pressure. (6-7 pressure setting)
Your Custom Shirt or garment is ready!
Note
Even heat distribution and a Good firm pressure Heat press is very important for good adhesion, avoid any zipper / pockets / seams / buttons / etc. within the press area.
Polyester/Blend Fabric: If Needed Lower the temperature to 250-280 degrees & shorten time 3-5 seconds, these types of fabrics absorb heat at a much faster rate.